The adjustment of ink coding machine

Ink coding machine has a very good printing effect, with the spray code of the spray machine effect, is a small processing plant and entrepreneurs a good replacement for the jet code machine; The ink code machine also has the characteristics of simple operation, cheap consumables, and easy maintenance. It is very popular with small enterprises.

Ink code machine in the use of the process will often appear a few problems, here to the general user to guide the operation:

1, the printing effect is not good: the ink printing machine ink needs to use diluent to adjust, theoretically according to the ratio of 1:1 to adjust, in the actual operation process can be based on the actual ratio, if the date of play is not too obvious, Explanation ink too thick, can be appropriate amount of thinner adjustment, if printed out of the date point too thick or fuzzy, indicating that the ink too thin, can increase the amount of ink to adjust. Need to repeatedly debug until the appropriate ratio can be.

2, the printed date has a vertical line: first to determine where the vertical line point is, if it is an active disk, the vertical line is between the month and the day, then it is necessary to adjust the position of the rubber head, so that the concave line on the rubber head is aligned with the internal and external inventory contact points; If the vertical line is outside the date, the glue head is too long and the long part can be cut with a knife.

3, ink can not scrape clean: at this time need worse scraper, scraper's position is under the ink cartridge, and the place of contact with the disk, the white circle is.